As an Amazon Associate we earn from qualifying purchases.
Short answer: The UGREEN Nexode 30W model 90901B is a compact U.S.-plug wall charger with one USB-C port and a 30W maximum. Its U.S. retailer listing names PD 3.0 and PPS, among other protocols, but does not publish the exact output profiles needed to confirm a phone-specific fast-charge mode. Use this as a protocol-level selection guide: it cannot charge two devices at once or provide a 45W Samsung Super Fast Charging 2.0 session. Best Buy listing for model 90901B
As an Amazon Associate, we earn from qualifying purchases.
On this page:
This is desk research from a U.S. retailer and device-maker support pages, not a hands-on ProperlyGeek test. The exact fixed voltage and PPS current range for 90901B were not available in the product listing we reviewed, so this guide does not infer them from another UGREEN 30W model.
Confirm the exact 90901B model
The U.S. Best Buy page identifies model 90901B and describes a black Nexode 30W adapter with one USB-C output and a foldable U.S.-style plug. It lists PD 3.0, PPS, QC 4, SCP, FCP, and Apple 5V/2.4A among its charging technologies. The page’s model number matters: UGREEN product families contain visually similar 30W adapters, and protocol tables from a sibling model cannot establish the 90901B’s exact behavior. Best Buy product details
For a U.S. buyer, the foldable flat-blade plug is the practical advantage over a bulky multiport brick. This is a single-port adapter, however. If you want to charge a phone and earbuds simultaneously from one wall outlet, choose a verified multiport model instead of expecting a splitter or adapter to create another negotiated USB-C output.
Protocol-level phone selection: what can and cannot be confirmed
The charger’s 30W headline is its maximum output, not a rate every phone will use. The phone requests a supported protocol and power level. Best Buy lists PD 3.0 and PPS, which indicate protocol-level plausibility for devices using those standards, but do not establish a successful fast-charge match for any exact phone: the listing provides no fixed PDO or PPS voltage-current table. The matrix below describes what the public evidence suggests and what remains unconfirmed, not a certification of compatibility.
| Device type | What 90901B can establish | What to verify |
|---|---|---|
| USB-C iPhone | A USB-C port provides a wired charging option; the listing names PD 3.0. | Listing does not confirm the 90901B’s exact PD profile or a particular iPhone’s fastest mode; check the exact label and Apple guidance. Apple |
| Google Pixel | Google supports USB-C charging and recommends a PPS charger rated 30W or higher for Pixel 10 fast charging; the 90901B listing includes PPS and a 30W maximum. | Exact 90901B PPS range is not published in the retailer detail, so do not promise peak Pixel speed. Google Pixel charging |
| Samsung Galaxy | PPS appears in the listing, but this is only a protocol label. | The 30W ceiling is below Samsung’s 45W SFC 2.0 supply tier. Do not assume an exact Galaxy fast-charge mode from this listing; check the label and Samsung guidance. Samsung |
| USB-C earbuds or accessories | A single USB-C output is suitable when the accessory accepts USB-C charging. | Accessory input limits and cable type; it will not charge a second item simultaneously. |
Apple’s USB-C charging guidance is useful for the connector and adapter relationship, but the particular iPhone’s own specification still controls the result. Apple USB-C charging support Pixel support makes the same practical point: use a compatible charger and check the model’s requirements instead of assuming that a higher printed wattage is automatically faster. Google Pixel charging support
Does the package include a cable?
The retailer listing reviewed identifies the charger but does not give sufficiently clear package contents to confirm an included cable. Plan for a compatible USB-C cable unless the seller’s live box-contents section explicitly says one is included. Cable choice matters because a cable can be physically compatible yet still have damage, poor quality, or a capability unsuitable for the desired power. For this 30W class, do not buy an expensive 5A/240W cable solely to unlock a wattage this charger cannot deliver.
The 90901B page does not give its full AC input range or every USB output profile in the product details we reviewed. That means buyers traveling internationally should verify the actual label on the adapter and local plug needs; the U.S. foldable plug alone is not proof of worldwide mains compatibility. Do not substitute the input range from a different Nexode model.
What the 30W ceiling means in everyday use
Thirty watts is ample for many phones, earbuds, and some small USB-C devices, but compatibility is a negotiation, not a guarantee. A laptop that requires more power may charge slowly, hold its battery level under light use, or decline to charge while active. This is not a 30W multiport charger: there is no shared-power chart because the product listing identifies one output.
Samsung’s 45W Super Fast Charging 2.0 is a clear example of a mismatch. UGREEN’s 30W maximum cannot become a 45W session through a different cable. It may still charge a compatible Samsung phone at a lower negotiated rate, but the listing’s PPS mention alone does not prove every model’s fastest mode. Samsung 45W guidance
For Pixel 10, Google’s published fast-charge conditions include a 30W PPS adapter or higher. The 90901B shares those broad labels, but that is not enough to confirm its required PPS window: the retailer does not publish the exact voltage/current ranges. Check the exact adapter label or obtain model-specific UGREEN documentation before relying on Pixel 10’s maximum rate. The same limitation applies to other phone-specific PPS claims. Google Pixel 10 specifications
Who should buy the Nexode 30W 90901B?
It is a sensible candidate if you need one small U.S. wall charger, value a foldable plug, and accept that the public listing only establishes broad protocol labels rather than exact phone-profile compatibility. Consider it a protocol-level fit, not a certified match for your phone’s peak charging mode.
Look at a different class if you need two devices at once, a published PPS range for a specific phone, a confirmed international input specification, an included cable, or 45W Samsung SFC 2.0. A 45W or higher adapter with verified protocol profiles is the appropriate direction for the latter, though the device and cable must still support the mode.
Before purchasing, check four details on the live listing: model 90901B; one USB-C port; U.S. foldable plug; and package contents. If a specific fast-charge mode matters, compare your phone’s required voltage/current or protocol window with the exact adapter label or an official 90901B profile table. If that profile is unavailable, the exact match remains unconfirmed. Do not use another Nexode model’s spec sheet to fill the gap.
FAQ
Is the 90901B confirmed to fast-charge my exact phone?
Not from the listing reviewed. It names PD 3.0 and PPS, but omits the exact output profiles. Check the phone’s requirement against the adapter label or an official 90901B profile table; otherwise the model-specific fast-charge match remains unconfirmed.
Can this charger charge two devices at once?
No. The listed 90901B has one USB-C port. Choose a multiport charger if simultaneous charging matters.
Does “PPS” mean it can deliver 45W to Samsung?
No. The charger is rated up to 30W. PPS support does not override the adapter’s output ceiling, and Samsung identifies 45W equipment requirements for SFC 2.0.
Is a cable included?
The product detail reviewed did not clearly confirm package contents. Verify the seller’s current box contents or assume you need your own cable.
The 90901B is best understood as a single-device, 30W U.S. charger with broad protocol labels but no public exact PDO/PPS table in the listing reviewed. It can be considered at the protocol-selection level, while any phone-specific fast-charge match remains unconfirmed until the exact adapter profile is checked. Choose a documented multiport or higher-output model if you need those capabilities.
Header image: AI-generated editorial illustration, not a product photograph or test setup.